- Title
- Experimental simulation analysis of the process and failure characteristics of spalling in D-shaped tunnels under true-triaxial loading conditions
- Creator
- Luo, Yong; Gong, Fengquiang; Liu, Dongqiao; Wang, Shanyong; Si, Xuefeng
- Relation
- Tunnelling and Underground Space Technology Vol. 90, Issue August 2019, p. 42-61
- Publisher Link
- http://dx.doi.org/10.1016/j.tust.2019.04.020
- Publisher
- Elsevier
- Resource Type
- journal article
- Date
- 2019
- Description
- Spalling is a typical failure mode encountered on the sidewalls after the tunnel face excavation of deep D-shaped tunnels or caverns. It significantly affects the safe and efficient construction and long-term stability of tunnels. To study the process and failure characteristics of sidewall spalling in D-shaped tunnels, four different three-dimensional initial stress states were established to perform a series of true-triaxial tests on cube specimens with a D-shaped hole. During the tests, a wireless micro camera was used to monitor and record the failure process of the sidewall in real time. Based on the test results, the process and failure characteristics of sidewall spalling were summarised, and the influence of cross-section shape on tunnel failure characteristics and tunnel stability were discussed. The results indicate that both sidewalls perpendicular to the maximum principal stress are cut into approximately parallel rock slabs, demonstrating typical spalling features. Failure zones on both sidewalls are located primarily between the corner and spandrel, and their outlines are “V” shaped (i.e., V-shaped notch). Spalling slabs are thin in both wings, and thick in the middle; they are cut into multilayer thin slices that are not completely detached from one another. With the increase in failure depth, the shape of the cracks first evolved from a straight shape into an arced shape, and subsequently evolved into a “V” shape. When the maximum principal stress is perpendicular to the tunnel axis, tunnel excavation along the minimum principal stress is conducive to the prevention of spalling. Compared with the circular tunnels, the D-shaped tunnels can effectively reduce the severity of rock failure and transform the rockburst into a static spalling. In a relatively low stress environment, the D-shaped cross section can improve the stability of the tunnel, while it is not conducive to the stability of the tunnel in a high stress environment. The result of this study benefits the design and prevention of spalling and rockburst of hard rock tunnels.
- Subject
- d-shaped tunnels; spalling Rockburst; rockburst; true-triaxial loading; v-shaped notch
- Identifier
- http://hdl.handle.net/1959.13/1416749
- Identifier
- uon:37114
- Identifier
- ISSN:0886-7798
- Language
- eng
- Reviewed
- Hits: 2731
- Visitors: 2727
- Downloads: 0
| Thumbnail | File | Description | Size | Format |
|---|